Basic Leather Carving Instructions Part VII
Seeder Tool Usage

In leather working the seeder is used mainly in the center of scrolls and flowers.

24. The seeder is used primarily to create flower centers and to embellish scroll ends. They are available in a variety of sizes, and both smooth or textured. 25. A single seed impression is usually used in the center of the scroll ends.
26. Flower centers are made by first stamping seeder impressions around the perimeter of the center. 27. The seeder is then used to fill in the center.

The pattern used here is from the excellent tutorial book The Leatherworking Manual. I highly recommend this book.

Click Here for a large selection of Seeder Tools.

CONTINUE TO BASIC LEATHER CARVING PROCEDURE PAGE 8

 


Disclaimer: The information presented here is accurate to the best of my knowledge and common leather working practices as of the time of this writing. This article was originally published to the internet in June 2009 and has been modified and republished in April 2012. The author and the publisher accept no liability for the use or misuse of any of the information presented in this article. This article is presented for informational purposes and is used at your own risk.

Author: Bob Sherman

Publisher: Bobby's Craft Boutique Inc.

This article is provided free of charge for use.

Web sites may use links to this page without restriction.

No portion of this article may be reproduced for publication elsewhere without express permission from Bobby's Craft Boutique Inc. with the following exceptions: