Gem Candle Mold Instructions

Before making any candles, please read our Candle Making Safety Instructions.

Always handle these molds and inserts with care as they have sharp edges which may cause injury.

  1. Make sure the mold is clean and dry.

  2. Coat the mold and insert or inserts with mold release.

  3. Position the inserts inside the mold. Most gem molds have 2 inserts, some have the lower facets built into the mold and come with only the upper insert (M5040).

  4. Once the inserts are in place wick the mold normally. Wicking instructions may be found here.

  5. Fill the mold with melted wax. The wax must cover the upper insert.

  6. Allow the wax to cool and If necessary make a second pour.

  7. When the candle is ready remove the wax and inserts from the mold.

  8. Gently pry the inserts away from the candle. Use extreme caution when handling the sharp inserts.

  9. Clean up any seams with a sharp knife.

  10. Level the base and trim the wick as you would for any candle.

  11. The wax remaining after removal of the inserts may be remelted and used for the next candle.

 

THE MOST IMPORTANT PIECE OF CANDLE MAKING EQUIPMENT YOU CAN OWN IS AN ABC TYPE, DRY CHEMICAL FIRE EXTINGUISHER.

 

Look for more instructions coming soon.

Click here for more basic candle making instructions.

Click here for free candle project instructions (thumbnail directory)

Click here for free candle project instructions (text index)


Support Free Projects
You can help ensure the continued availability and production of free candle making projects and instructions by telling your friends about them. The more popular they are the more we can produce so tell your friends, mention them on message boards, link to them from your web site, etc... More information is available here.


Disclaimer: The information presented here is accurate to the best of my knowledge and common candle making practices as of the time of this writing Originally published in August 2010 and updated in June 2011. The author and the publisher accept no liability for the use or misuse of any of the information presented in this article. This article is presented for informational purposes and is used at your own risk.

Author: Bob Sherman

Publisher: Bobby's Craft Boutique Inc.

This article is provided free of charge for use. Candles may be made and sold using this design royalty free, however no portion of this article may be reproduced for publication elsewhere without express permission from Bobby's Craft Boutique Inc. with the following exceptions: